MEMory Subsystem 7
Keysight N8262A Programming Guide 287
MEMory:CATalog:STATe?
This command is used to list the save/recall registers.
The power meter returns the data in the form of two numeric parameters and as
many strings as there are save/recall registers.
<numeric_value>,<numeric_value>{,<string>}
– The first numeric parameter indicates the amount of memory, in bytes, used
for the storage of registers.
– The second parameter indicates the memory, in bytes, available for the
storage of registers.
– Each string parameter returned indicates the name, type and size of a save/
recall register:
– <string>,<type>,<size>
– <string> indicates the name of the save/recall register.
– <type> indicates STAT for save/recall register.
– <size> indicates the size of the save/recall register in bytes.
For example, a sample of a response may look like:
0,16190,"State0,STAT,0","State1,STAT,0" .........
Syntax
Example
MEM:CAT:STAT? This command queries the list of save/recall
registers.
To Next Page
Loading...
Need help?
General
