Keysight Technologies P Series User Manual

3 CALCulate Subsystem
192 Keysight N8262A Programming Guide
CALCulate[1]|2|3|4:GAIN Commands
These commands are used to enter and enable a display offset on the specified
window/measurement. The display offset is applied to the measurement signal
after any math calculation.
The following commands are detailed in this section:
CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric value>
CALCulate[1]|2|3|4:GAIN:STATe <boolean>

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English