DISPlay Subsystem 5
Keysight N8262A Programming Guide 257
Query
DISPlay:[WINDow[1]|2]:FORMat?
The query returns the current format of the selected window.
Query Example
Error Messages
– If the command is set to TRACe and the selected channel from which TRACe is
taken has no sensor connected or has on a sensor other than a P-Series power
sensor connected, error –241, “Hardware missing” occurs.
– If the command is set to TRACe and the selected channel has a P-Series power
sensor connected in AVERage measurement mode, the error –221, “Settings
conflict” occurs.
DISP:FORM? This command queries the current format of
the upper window.
To Next Page
Loading...
Need help?
General
