Keysight Technologies P Series

STATus Subsystem 11
Keysight N8262A Programming Guide 437
STATus:PRESet
PRESet sets a number of the status registers to their preset values as shown below
- all other registers are unaffected. Bit 15 is always 0.
Syntax
Register Filter/Enable PRESet Value
OPERational ENABle all zeros
PTR all ones
NTR all zeros
QUEStionable ENABle all zeros
PTR all ones
NTR all zeros
All Others ENABle all ones
PTR all ones
NTR all zeros
STAT
:PRES