Keysight Technologies P Series - 8 Output Subsystem

Keysight N8262A P-Series Modular Power Meter
Programming Guide
315
8 OUTPut Subsystem
OUTPut Subsystem 316
OUTPut:RECorder[1]|2:FEED <data_handle> 317
OUTPut:RECorder[1]|2:LIMit:LOWer <numeric_value> 319
OUTPut:RECorder[1]|2:LIMit:UPPer <numeric_value> 321
OUTPut:RECorder[1]|2:STATe <boolean> 323
OUTPut:ROSCillator[:STATe] <boolean> 324
OUTPut:TRIGger[:STATe] <boolean> 325
This chapter explains how the OUTPut command subsystem is used to switch the
POWER REF output on and off.