Keysight Technologies P Series

8 OUTPut Subsystem
316 Keysight N8262A Programming Guide
OUTPut Subsystem
The OUTPut command subsystem is used to control the trigger output, switch on
and off the POWER REF output, and controls the recorder output.
Keyword Parameter Form Notes Page
OUTPut
:RECorder[1]|2
:FEED <data_handle> page 317
:LIMit
:LOWer <numeric_value> page 319
:UPPer <numeric_value> page 321
:STATe <boolean> page 323
:ROSCillator
[:STATe] <boolean> page 324
:TRIGger
[:STATe] <boolean> page 325