10 SENSe Subsystem
394 Keysight N8262A Programming Guide
Query
[SENSe[1]]|SENSe2:POWer:AC:RANGe:AUTO?
The query enters a 1 or 0 into the output buffer indicating the status of
autoranging.
– 1 is returned when autoranging is enabled
– 0 is returned when autoranging is disabled
Query Example
Error Messages
– If this command is set to OFF when there is not an E-Series Power Sensor
connected, the error –241, “Hardware missing” occurs.
POW:AC:RANG:AUTO? This command queries whether auto ranging
is on or off.
To Next Page
Loading...
