Keysight Technologies P Series

16 SERVice Subsystem
642 Keysight N8262A Programming Guide
SERVice:SENSor[1]|2:SNUMber?
This query returns the serial number for E-Series sensors. Serial number
information is stored in the sensor’s EEPROM.
Syntax
Example
Error Messages
– If no sensor is connected, error –241, “Hardware missing” occurs.
– If a a sensor other than a P-Series or E-Series power sensor is connected, error
–241 “Hardware missing” occurs.
SERV:SENS2:SNUM? This query returns the serial number of the
E-Series sensor connected to Channel B.
:SNUM
?
SERV
1
2
:SENS