Keysight Technologies P Series User Manual

8 OUTPut Subsystem
324 Keysight N8262A Programming Guide
OUTPut:ROSCillator[:STATe] <boolean>
This command enables/disables the POWER REF output.
Syntax
Example
Reset Condition
On reset, the POWER REF output is disabled.
Query
OUTPut:ROSCillator[:STATe]?
The query command enters a 1 or 0 into the output buffer indicating whether or
not the POWER REF is enabled.
– 1 is returned when the POWER REF output is enabled
– 0 is returned when the POWER REF output is disabled
Query Example
OUTP:ROSC:STAT 1) This command enables the POWER REF
output.
OUTP :STAT
:ROSC 0|OFF
1|ON
Space
?
OUTP:ROSC? This command queries the status of the
POWER REF output.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English