Keysight Technologies P Series

SYSTem Subsystem 12
Keysight N8262A Programming Guide 455
SYSTem:COMMunicate:LAN:DHCP[:STATe] <boolean>
This command enables the dynamic host configuration protocol.
Syntax
Example
Query
SYSTem:COMMunicate:LAN:DHCP?
– 1 is returned if DHCP is enabled
– 0 is returned if DHCP is disabled
Query Example
SYST:COMM:LAN:DHCP ON This command enables the DHCP.
SYST
:COMM
:LAN
:DHCP
:STAT
0|OFF
1|ON
Space
?
SYST:COMM:LAN:DHCP? This command queries the state of the DHCP.