Keysight Technologies P Series User Manual

SYSTem Subsystem 12
Keysight N8262A Programming Guide 449
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
This command returns the current setting of the IP address in use by the power
meter.
Syntax
Example
NOTE
If DHCP or AutoIP are enabled and successful, then one of these IP address
modes assigns the IP address, otherwise it is the static IP address.
SYST
:COMM
:CURR
:ADDR
?
:LAN
SYST:COMM:LAN:CURR:ADDR? This command queries the current setting of
the IP address.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English