13 TRACe Subsystem
542 Keysight N8262A Programming Guide
TRACe[1]|2:DEFine:DURation:REFerence<numeric_value>
This command defines the reference levels to be used in the calculation of pulse
durations. This allows pulse duration measurements between non-standard
reference levels. This is a configuration command independent of the sensors.
Syntax
Parameters
1
2
TRAC
:REF
numeric_value
:DEF
:DUR
Space
?
Item Description/Default Range of Values
numeric_value Reference levels to be used in calculation of pulse duration 0 to 100
DEF
To Next Page
Loading...
