Keysight Technologies P Series User Manual

TRIGger Subsystem 14
Keysight N8262A Programming Guide 577
INITiate[:IMMediate]:ALL
This command initiates all trigger sequences.
Syntax
Example
Error Messages
If the power meter is not in the idle state or INITiate:CONTinuous is ON, error
–213, “INIT ignored” occurs.
INIT:IMM:ALL This command initiates all trigger
sequences.
INIT
:IMM
:ALL

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English