Keysight Technologies P Series - Display[:Window[1]|2] Commands

DISPlay Subsystem 5
Keysight N8262A Programming Guide 247
DISPlay[:WINDow[1]|2] Commands
These commands control various characteristics of the display windows. WINDow1
and WINDow2 represent the upper and lower windows respectively.
The following commands are detailed in this section:
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value>
DISPlay[:WINDow[1]|2]:ANALog:UPPer <numeric_value>
DISPlay[:WINDow[1]|2]:FORMat <character_data>
DISPlay[:WINDow[1]|2]:METer:LOWer <numeric_value>
DISPlay[:WINDow[1]|2]:METer:UPPer <numeric_value>
DISPlay[:WINDow[1]|2][NUMeric[1|2]]:RESolution <numeric_value>
DISPlay[:WINDow[1]|2]:SELect[1]|2
DISPlay[:WINDow[1]|2][:STATe] <boolean>
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data>