11 STATus Subsystem
438 Keysight N8262A Programming Guide
Questionable Register Sets
The questionable register sets contain information which gives an indication of the
quality of the data produced by the power meter. The contents of the individual
registers in these register sets may be accessed by appending the commands
listed in “Status Register Set Commands”.
The following command descriptions detail the SCPI register you require to
control but do not detail the register set commands.
The three questionable register sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
To Next Page
Loading...
