Keysight Technologies P Series

7 MEMory Subsystem
308 Keysight N8262A Programming Guide
MEMory:TABLe:FREQuency:POINts?
This query returns the number of frequency points for the table currently selected.
The response format is <NRf>. If no frequency values have been set, this command
returns 0. If no table is selected, this command returns NAN.
Syntax
Example
MEM:TABL:FREQ:POIN? This command queries the number of
frequency points in the current table.
MEM
:TABL
:POIN
?
:FREQ