Keysight Technologies P Series User Manual

14 TRIGger Subsystem
604 Keysight N8262A Programming Guide
Query
TRIGger[:SEQuence[1]|2]:SOURce?
The query returns the current trigger source.
Query Example
Error Messages
– If the master is changed to IMM, BUS or HOLD, error –221 “Settings Conflict”
occurs. In such situations the slave’s TRIG:SOUR must be changed so that it is
no longer a slave.
– If the source is changed to INT1, INT2 or EXT and SENS:SPEED has a value of
200, error –221 “Settings Conflict” occurs.
– If the source is changed to INT1, INT2 or EXT and SENS:DET:FUNC is set to
AVERage, error –221 “Settings Conflict” occurs.
TRIG:SEQ1:SOUR? This command queries the current trigger
source for Channel A.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English