Keysight Technologies P Series

STATus Subsystem 11
Keysight N8262A Programming Guide 435
STATus:OPERation:TRIGger[:SUMMary]
The operation status trigger summary register set contains information on the
trigger status of the power meter.
The following bits in these registers are used by the power meter:
Syntax
Bit Number Decimal Weight Definition
0-Not used
1 2 Channel A TRIGger Status
2 4 Channel B TRIGger Status
3-15 - Not used
STAT
:OPER
:TRIG
:SUMM