Keysight Technologies P Series User Manual

SERVice Subsystem 16
Keysight N8262A Programming Guide 643
SERVice:SENSor[1]|2:TNUMber?
This query returns the tracking number for E-Series sensors. Tracking number
information is stored in the sensor’s EEPROM.
Syntax
Example
Error Messages
– If no sensor is connected, error –241, “Hardware missing” occurs.
– If a a sensor other than a P-Series or E-Series power sensor is connected, error
–241 “Hardware missing” occurs.
SERV:SENS2:TNUM? This query returns the serial number of the
E-Series sensor connected to Channel B.
:TNUM
?
SERV
1
2
:SENS

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English