Keysight Technologies P Series User Manual

14 TRIGger Subsystem
568 Keysight N8262A Programming Guide
ABORt[1]|2]
This command removes the specified channel from the wait for trigger state and
places it in the idle state. It does not affect any other settings of the trigger
system. When the INITiate command is sent, the trigger system responds as it
did before ABORt was executed.
If INITiate:CONTinuous is ON, then after ABORt the specified channel immediately
goes into the wait for trigger state.
Syntax
Example
ABOR This command places Channel A in the idle
state.
ABOR
1
2

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English