12 SYSTem Subsystem
514 Keysight N8262A Programming Guide
1xeV-DO
The following table shows the power meter presets when <character_data> is
set to XEVDO. Commands not listed are preset according to their DEFault values
(for further information refer to Table 12-1).
Table 12-31 802.11b/g: Power meter presets for secondary channel sensors
Function Secondary Channel Sensor
No Sensor Non P-Series Sensor P-Series Sensor
Display setup
Upper window UU Single numeric Dual numeric Dual numeric
Lower window Dual numeric Dual numeric Dual numeric
Upper window/lower measurement (UL)
Feed DEF
Gate 1 primary channel
[a]
Gate1 primary channel
[a]
(Channel A)
Measurement DEF Peak Peak
Lower window/upper measurement (LU)
Feed
Gate 1 primary channel
[a]
Gate 1 primary channel
*
Gate 1 secondary channel
[a]
(Channel B)
Measurement Peak Pk-to-Avg Avg
Lower window/lower measurement (LL)
Feed
Gate 1 primary channel
[a]
Secondary channel
[a]
Gate1 secondary channel
[a]
(Channel B)
Measurement Pk-to-Avg Avg Pk-to-Avg
[a] For further information refer to “Primary and Secondary Channels” on page 473.
To Next Page
Loading...
