Keysight Technologies P Series User Manual

SENSe Subsystem 10
Keysight N8262A Programming Guide 367
Query Example
Error Messages
The SENSe[1]]|SENSe2:CORRection:CFACtor|GAIN1 command can be used for
the 8480 Series Power Sensor when no sensor calibration table has been set up. If
a sensor calibration table is selected the error –221, “Settings Conflict” occurs.
CORR:GAIN1? This command queries the current
calibration factor setting for Channel A.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English