Keysight Technologies P Series

10 SENSe Subsystem
414 Keysight N8262A Programming Guide
SENSe[1]|2:TRACe:X:SCALe:PDIV <numeric_value>
This command is used to set the X Scale value (per division) for the selected trace.
Syntax
Parameters
Example
NOTE
This command is only applicable when N192x sensor is present and trigger
acquisition mode is selected.
1
2
Space
?
:X
SENS
:TRAC
:SCAL
:PDIV
numeric_value
Item Description/Default Range of Values
numeric_value The numeric value for X-axis scale. 2 ns to 0.1 s
SENS:TRAC:X:SCAL:PDIV 0.02 This command sets the X Scale value of
Channel A to 0.02 step.
SENS2:TRAC:X:SCAL:PDIV 0.05 This command sets the X Scale value of
Channel B to 0.05 step.