Keysight Technologies P Series User Manual

3 CALCulate Subsystem
196 Keysight N8262A Programming Guide
Query Example
Error Message
If CALCulate[1]|2|3|4:GAIN:STATe is set to ON while SENSe:SPEed is set to 200,
error –221, “Settings Conflict” occurs.
CALC1:GAIN:STAT? This command queries whether the display
offset in the upper window/upper
measurement is on or off.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English