Keysight Technologies P Series - Page 207

CALCulate Subsystem 3
Keysight N8262A Programming Guide 207
Parameters
Example
Reset Condition
On reset, both channels are set to +90.00 dBm or +90 dB.
Query
CALCulate[1]|2|3|4:LIMit:UPPer[:DATA]? [MIN|MAX]
Item Description/Default Range of Values
numeric_value A numeric value for the lower test limit:
– DEF: the default is –90.00 dBm or –90 db
– MIN: –150 dBm or –180 dB
– MAX: +230 dBm or +200 dB
–150 to +230 dBm or
–180 to +200 dB
DEF
MIN
MAX
CALC2:LIM:UPP:DATA 5 This command enters an upper limit for the
lower window/upper measurement
depending on the window’s units as follows:
dBm = 5 dBm
W = 5 W
dB = 5 dB
% = 5 %