Keysight Technologies P Series User Manual

3 CALCulate Subsystem
210 Keysight N8262A Programming Guide
Query Example
Error Message
If CALCulate[1|2|3|4]:LIMit:STATe is set to ON while
[SENSe[1]]|SENSe2:SPEed is set to 200, error –221, “Settings Conflict” occurs.
CALC1:LIM:STAT? This command queries whether the limit
checking function for the upper window/
upper measurement is on or off.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English