Keysight Technologies P Series User Manual

4 CALibration Subsystem
238 Keysight N8262A Programming Guide
Query
CALibration[1]|2:ZERO:AUTO?
The query always returns a value of 0.
Error Messages
– If this command is set to ON and an 8480 Series or E-Series power sensor is
connected the error –241, “Hardware missing” occurs.
– If zeroing was not carried out successfully the error –231, “Data Questionable;
ZERO ERROR” occurs. The error message will specify which channel failed
zeroing.
– If there is no sensor connected, the error –241, “Hardware Missing” occurs.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English