Keysight Technologies P Series

10 SENSe Subsystem
396 Keysight N8262A Programming Guide
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME <numeric_value>
This command sets the delay between the delayed trigger point and the start of the
time-gated period (the offset time) for a P-Series sensor set to NORMal mode. .
Syntax
Parameters
SENS
1
:TIME
SENS2
:
:OFFS
numeric_value
DEF
Space
SWE
?
1
2
3
4
Item Description/Default Range of Values
numeric_value The delay between the trigger point and the start of the
time-gated period.
– DEF: the default value is 0 seconds
Units are resolved to 1 ns.
–1 to 1 second
DEF