Page 128 Data entry/Programming Group 7
Release R1.12 en JET2 neo
Example
1. Set the IP address and subnet mask of the JET2neo printer. All other settings in the IP
address dialog box are not relevant for the setup of VNC connection.
The settings depend on the network into which the printer has to be implemented.
2. Connect a WiFi router to the JET2neo.
3. Please see the manual of the router for details about the settings. In this
example the router is set to the following IP-address: 192.168.1.1.
The VNC server of the JET2neo printer uses port 5900.
4. Connect the external device on which the VNC client software is installed either by
cable or WiFI to the router.
5. Start the VNC client on the external device and enter the required settings. The required
settings depend on the VNC client used. Please see the VNC client’s manual for details.
With the correct settings a connection to the JET2neo printer can be established.
The display of the JET2neo will be mirrored on the VNC client software and the printer
can be operated from the external device.
6. It is possible to add more than one WIFI device like e.g. laptops, Android/Apple tablets
/phones to the WIFI net of the router in order to access the JET2neo printer. Make sure
that there is a VNC client like Real VNC, Ultra VNC (Windows OS) or screens VNC
(IOS) installed on the device. For Android devices you can use bVNC or Real VNC.
7. You can also make a cable connection to the router. The number of cable
connections depends on the type of router used. Cable connections may be used e.g.
to connect a desktop PC.
In that case you have to make sure that the LAN adapter of the PC is set to the
correct address space!
Please contact your system administrator in order to implement the
LEIBINGER JET2neo printer in a local network. LEIBINGER cannot be
held liable for any malfunctions caused by inappropriate network
settings!
The software suggested is to be understood as examples.
The suggested software is no LEIBINGER product nor it will be
supported by LEIBINGER.
To Next Page
Loading...
