Page 204 Job editor Group 8
Release R1.12 en JET2 neo
Example MeterGo function – Continuation
Picture 7 – Example function diagram
After 32 meters, the printout stops for e.g. print head cleaning. Nevertheless, the JET2neo is
still receiving PrintGo signals. Because of the <Counter Increment> setting “with PrintGo”
(see picture 3) these signals can be used to keep the counter updated.
Therefore, the counter always has the current meter number no matter whether there are
printouts or not. So, it is possible to resume with the correct meter number after the work on
the print head.
To Next Page
Loading...
