Group 10 Equipping/Maintenance Page 263
JET2 neo Release R1.12 en
4. If you placed a bottle with the wrong ink or solvent you are not allowed to fill up the
reservoir tank with this bottle! The printer displays one of the following messages.
5. As already mentioned you can activate a TAG only once. So it may happen that an
already activated bottle is placed in front of the TAG-reader. When your bottle was
already activated you are not allowed to fill up the reservoir tank! The printer will
display one of the following messages:
6. If you place a compatible and not activated bottle in front of the TAG-reader you have
to activate the ink or solvent before refilling. If you place a compatible not activated
bottle in front of the TAG reader the printer will display one of the following messages:
To Next Page
Loading...
