Page 264 Equipping/Maintenance Group 10
Release R1.12 en JET2 neo
7. During the activation process the bottle has to be kept permanently in front of the
TAG reader! The readability is indicated by symbols located in the upper right
corner of the dialog box.
TAG was recognized and is
readable
TAG was not recognized and
was not read
8. If the activation was successful the following dialog boxes will be displayed:
Successfully activated ink
Successfully activated solvent
In case a TAG is removed from the TAG reader during the activation process
an error message may be displayed:
Ink TAG activation not successful:
Solvent TAG activation not
successful:
It is possible that a TAG may be damaged by a failed activation and
therefore it is not recognized by the TAG reader anymore.
In that case please contact your LEIBINGER dealer.
To Next Page
Loading...
