365-575-102 Operation and Maintenance: IXL-001
Issue 8.0, July 2002 Page 1 of 14
FT-2000 MULTIPLEXER
Master Task Index
Operation and Maintenance
FIND YOUR JOB IN THE LIST BELOW . . . . . . . . . . . THEN GO TO
Accept Added Electrical Low-Speed Cables to an
In-Service FT-2000 Network Element Acceptance: NTP-008
Accept Added Optical Low-Speed Fibers to an
In-Service FT-2000 Network Element Acceptance: NTP-010
Accept Dual Ring Interworking (DRI) Connections
To/From an FT-2000 Ring Acceptance: NTP-009
Accept FT-2000 2-Fiber Ring Network Acceptance: NTP-007
Accept FT-2000 OC-48 1x1 End Terminal Acceptance: NTP-002
Accept FT-2000 OC-48 Add/Drop-Rings Terminal
for 2-Fiber Ring Acceptance: NTP-006
Accept FT-2000 OC-48 Add/Drop-Rings Terminal
for Operation With an FT-2000 Lightwave
Booster Amplifier (FT-LBA) Acceptance: NTP-011
Accept FT-2000 OC-48 Repeater Bay/Shelf Acceptance: NTP-005
Accept FT-2000 Point-to-Point Network Acceptance: NTP-003
Accept Protection Access Upgrade in
Point-to-Point Network Acceptance: NTP-004
Add a Node to an In-Service 2-Fiber Ring
Network Circuit Order: NTP-008
Add DS3 and/or EC1 Low-Speed Port(s) Circuit Order: NTP-002
Add OC-12 Low-Speed Slot(s) Circuit Order: NTP-012
Add OC-3/IS-3 Low-Speed Slot(s) Circuit Order: NTP-010
Add OC-48 Protection Line to Point-to-Point
Network Circuit Order: NTP-005
Address ‘CP Reset in Progress’ Trouble Clearing: TAP-151
Address ‘Extra Traffic Preempted’ Trouble Clearing: TAP-143
To Next Page
Loading...