IXL-001: Operation and Maintenance 365-575-102
Page 2 of 14 Issue 8.0, July 2002
FT-2000 MULTIPLEXER
Address ‘Inc. (from OC3) DCC Failure’ or
Address ‘Inc. (from OC12) DCC Failure’ Trouble Clearing: TAP-169
Address ‘Incoming (From OC-48) DS3 AIS’ Trouble Clearing: TAP-109
Address ‘Line FERF’ or ‘Incoming OC-48 Line
RFI/Yellow’ Trouble Clearing: TAP-121
Address ‘Path AIS’, ‘Path Yellow’, ‘Incoming (from
OC-48) DS3 LOF’, ‘Inc(from STSX) Line
RFI/Yellow’, ‘Inc(from OC48) Path RFI/Yellow’,
‘Incoming OC3 Line RFI/Yellow’, and ‘Incoming
OC12 Line RFI/Yellow’ Trouble Clearing: TAP-122
Address ‘Reset in Progress’ Trouble Clearing: TAP-124
Address ‘TG Warming Up’ Trouble Clearing: TAP-154
Address ‘TID Address Map Full’ Trouble Clearing: TAP-170
Address ‘TL-1 Link Failure’ Trouble Clearing: TAP-106
Address ‘Traffic Squelched’ Trouble Clearing: TAP-146
Address an Unexplained Loss of Service Trouble Clearing: TAP-166
Address Condition at Remote Repeater
Bay/Shelf Trouble Clearing: TAP-147
Address Environmental Input Condition Trouble Clearing: TAP-107
Address Incoming Signal Failure Trouble Clearing: TAP-110
Address Missing or Incorrect Response Trouble Clearing: TAP-108
Change an OC-12 Link From 0x1 to 1+1
Protection Mode Circuit Order: NTP-015
Change an OC-12 Link From 1+1to0x1
Protection Mode Circuit Order: NTP-017
Change an OC-3/IS-3 Link From 0x1 to 1+1
Protection Mode Circuit Order: NTP-014
Change an OC-3/IS-3 Link From 1+1to0x1
Protection Mode Circuit Order: NTP-016
Change, Delete, or Enter a User’s Login Detailed Level Procedure: DLP-522
Clean Optical Fibers and Connectors Detailed Level Procedure: DLP-510
Clear (Optical Parameter) ‘Out-of-Range’ Trouble Clearing: TAP-135
Clear ‘APS Channel Failure’ Trouble Clearing: TAP-105
Clear ‘APS Provisioning Conflict’ Trouble Clearing: TAP-150
FINDYOURJOBINTHELISTBELOW...........THENGOTO
To Next Page
Loading...