365-575-102 Operation and Maintenance: IXL-001
Issue 8.0, July 2002 Page 3 of 14
FT-2000 MULTIPLEXER
Clear ‘Circuit Audit Suspended’ Trouble Clearing: TAP-161
Clear ‘Circuit Pack Failure’ Trouble Clearing: TAP-111
Clear ‘Circuit Pack Removed’ Trouble Clearing: TAP-112
Clear ‘Circuit Provisioning Error’ Trouble Clearing: TAP-162
Clear ‘Clock Out of Range’ Trouble Clearing: TAP-134
Clear ‘CP (Unknown Type) Failure’ Trouble Clearing: TAP-123
Clear ‘CP (Unknown Type) Removed’ Trouble Clearing: TAP-148
Clear ‘CPYPGM:IP (tid)’ Trouble Clearing: TAP-159
Clear ‘DCC Startup in Progress’ Trouble Clearing: TAP-129
Clear ‘DS3 Path Unequipped’ Trouble Clearing: TAP-156
Clear ‘DS-NE Not Reachable’ Trouble Clearing: TAP-137
Clear ‘Duplicate Node ID Defined’ or ‘Duplicate
TID Defined’ Trouble Clearing: TAP-138
Clear ‘Excessive Holdover’ Trouble Clearing: TAP-117
Clear ‘Fan Failure’ Trouble Clearing: TAP-118
Clear ‘FT-LBA (Condition)’ Trouble Clearing: TAP-157
Clear ‘Fuse/Power Failure’ Trouble Clearing: TAP-119
Clear ‘Inc. (From OC48) Sync Ref Fail’ Trouble Clearing: TAP-152
Clear ‘Incoming (From OC-48) STS LOP’ Trouble Clearing: TAP-174
Clear ‘Incoming DCC Failure’ or ‘Inc. (From
OC48) DCC Failure’ Trouble Clearing: TAP-120
Clear ‘Incoming OC3 APS Byte Fail’ or ‘Incoming
OC12 APS Byte Fail’ Trouble Clearing: TAP-160
Clear ‘Incoming OC-48 APS Byte Fail’ Trouble Clearing: TAP-132
Clear ‘Incoming OC48 APS Default Byte’ Trouble Clearing: TAP-168
Clear ‘Incoming OC-48 Invalid F Byte’ Trouble Clearing: TAP-145
Clear ‘LCLAN Failure’ Trouble Clearing: TAP-175
Clear ‘Multiple DS-NEs Defined’ Trouble Clearing: TAP-139
Clear ‘NE Status Comm Failure’ Trouble Clearing: TAP-172
Clear ‘Node ID Conflict’ Trouble Clearing: TAP-140
Clear ‘OC3/OC12 Mode Conflict (Equipment, Slot
Pair, X-Connect)’ Trouble Clearing: TAP-158
Clear ‘Path Integrity Failure’ Trouble Clearing: TAP-163
FIND YOUR JOB IN THE LIST BELOW . . . . . . . . . . . THEN GO TO
To Next Page
Loading...