IXL-001: Operation and Maintenance 365-575-102
Page 4 of 14 Issue 8.0, July 2002
FT-2000 MULTIPLEXER
Clear ‘Path TCA’, ‘Section TCA’, or ‘Line TCA’ Trouble Clearing: TAP-144
Clear ‘Ring Incomplete/Open’ Trouble Clearing: TAP-141
Clear ‘Ring Startup in Progress’ Trouble Clearing: TAP-142
Clear ‘Site Provisioning Conflict’ Trouble Clearing: TAP-130
Clear ‘Software Download in Progress’ Trouble Clearing: TAP-131
Clear ‘STS1 Squelch Map Conflict’ Trouble Clearing: TAP-164
Clear ‘STS3 Squelch Map Conflict’, ‘STS1
Squelch Map Conflict’, or ‘Squelch Map Conflict’ Trouble Clearing: TAP-153
Clear ‘STS3 Squelch Map Inconsistent’ or ‘STS1
Squelch Map Inconsistent’ Trouble Clearing: TAP-165
Clear ‘SYSMEM Failure’ or ‘SYSCTL Failure’ Trouble Clearing: TAP-113
Clear ‘SYSMEM Removed’ Trouble Clearing: TAP-133
Clear ‘SYSMEM Unrecognizable Code’ Trouble Clearing: TAP-125
Clear ‘SYSMEM/SYSCTL Code Mismatch’ Trouble Clearing: TAP-126
Clear ‘Unexpected CP Type’ Trouble Clearing: TAP-127
Clear ‘X-Conn Provisioned But Not Est’ Trouble Clearing: TAP-173
Clear Alarm When ‘NE ACTY’ and ‘FE ACTY’
LEDs Are Off (Cannot Log in to a Network
Element) Trouble Clearing: TAP-136
Clear Automatic Switch Condition Trouble Clearing: TAP-115
Clear DRI Switch Trouble Clearing: TAP-149
Clear Local Trouble When ‘USE CIT’ LED is
Lighted Trouble Clearing: TAP-102
Clear Local Trouble When ‘USE CIT’ LED is Off Trouble Clearing: TAP-101
Clear NE ACTY and/or FE ACTY (Regardless of
Alarm Level) Trouble Clearing: TAP-103
Clear Potential Loss of Service Due to Double
Failure Trouble Clearing: TAP-167
Clear Suspected Failure in FT-2000 Network
Element(s) Via Remote Modem (or Datakit
â
Network) Connection Trouble Clearing: TAP-155
Clear Trouble in CIT (CIT Does Not Respond to
Commands) Trouble Clearing: TAP-128
Clear Trouble Report Trouble Clearing: TAP-104
FINDYOURJOBINTHELISTBELOW...........THENGOTO
To Next Page
Loading...