365-575-102 Operation and Maintenance: IXL-001
Issue 8.0, July 2002 Page 5 of 14
FT-2000 MULTIPLEXER
Clear Trouble When ‘ABN’ LED Is Lighted Trouble Clearing: TAP-114
Clear Unsuccessful Circuit Pack Replacement Trouble Clearing: TAP-116
Connect and Condition Craft Interface Terminal
(CIT) Detailed Level Procedure: DLP-501
Connect Two FT-2000 Rings Via an Optical Link Operations: NTP-011
Copy Software From One Network Element to
Another Network Element Operations: NTP-005
Delete a Node From an In-Service 2-Fiber Ring
Network Circuit Order: NTP-009
Delete DS3 and/or EC1 Low-Speed Port(s) Circuit Order: NTP-003
Delete OC-12 Low-Speed Slot(s) Circuit Order: NTP-013
Delete OC-48 Protection Line From
Point-to-Point Network Circuit Order: NTP-004
Disconnect Dual Ring Interworking (DRI) STS-3
(or STS-1) Cross-Connections Operations: NTP-004
Discontinue Restoration Protection Access From
Point-to-Point Network Circuit Order: NTP-006
Enter or Change TID String of FT-2000 Network
Element Detailed Level Procedure: DLP-544
Enter/Delete DCC Assignment on OC-3/OC-12
Line Detailed Level Procedure: DLP-542
Enter/Delete/Edit Limited Granularity STS-1
Cross-Connections in Network Elements for
2-Fiber Ring Network (for Rel. 6 and Earlier) Detailed Level Procedure: DLP-537
Enter/Delete/Edit STS-3 (or STS-1)
Cross-Connections at Network Elements for
2-Fiber Ring Network Detailed Level Procedure: DLP-536
Establish Dual Ring Interworking (DRI) STS-3 (or
STS-1) Cross-Connections Operations: NTP-003
Establish Modem or Datakit
â
Network Access Detailed Level Procedure: DLP-521
Establish OC-3 Optical Span Extension Between
DDM-2000 OC-12 Ring and DDM-2000 OC-3
Ring Circuit Order: NTP-018
Establish or Disconnect Remote Login Using CIT Detailed Level Procedure: DLP-524
FIND YOUR JOB IN THE LIST BELOW . . . . . . . . . . . THEN GO TO
To Next Page
Loading...