SERVICE PROGRAM MODE TABLES
B079/B082 5-44 SM
SP5 Mode Number Function and [Setting]
2* Continuous Jam
Occurrence
Enables/disables initiating a call for consecutive
paper jams.
[0~1/1/1]
0: Disable
1: Enable
3* Continuous Door Open Enables/disables initiating a call when the front
door remains open.
[0~1/1/1]
0: Disable
1: Enable
4* Low Call Mode Enables/disables the new call specifications
designed to reduce the number of calls.
[0~1/1/1]
0: Normal mode
1: Reduced mode
11* Jam Detection: Time
Length
Sets the length of time a jam must remain before it
becomes an ‘unattended paper jam’.
[03~30/10/1]
This setting is enabled only when SP5508 004 is
enabled (set to 1).
12* Jam Detection: Continuous
Count
Sets the number of consecutive paper jams
required to initiate a call.
[02~10/5/1]
This setting is enabled only when SP5508 004 is
enabled (set to 1).
13* Door Open: Time Length Sets the length of time the door remains open
before the machine initiates a call.
[03~30/10/1]
This setting is enabled only when SP5508 004 is
enabled (set to 1).
21* Jam Operation: Time
Length
Determines what happens when a paper jam is left
unattended.
[0~1/1/1]
0: Automatic Call
1: Audible Warning at Machine
22* Jam Operation: Continuous
Count
Determines what happens when consecutive paper
jams occur.
[0~1/1/1]
0: Automatic Call
1: Audible Warning at Machine
5508
23* Door Operation: Time
Length
Determines what happens if the door remains open
(15 min.).
[0~1 / 1 / 1]
0: OFF
1: ON. Displays a warning. Pressing the call button
will contact the service center.
This setting is available for setting only if SP5508
004 is set for 1.
To Next Page
Loading...
