Ricoh B079 - Page 276

SERVICE PROGRAM MODE TABLES
B079/B082 5-50 SM
SP5 Mode Number Function and [Setting]
85* Format for Printer B&W Sets the default format for stored printer black and
white documents sent to the document
management server via the MLB.
[0~3 / 1 / 1]
0: JFIF/JPEG
1: TIFF/MMR
2: TIFF/MH
3: TIFF/MR
Enabled only when optional MLB (Media Link
Board) is installed.
86* Format for Printer B&W HQ Sets the default format for stored copy black and
white text documents sent to the document
management server via the MLB with quality given
higher priority.
[0~3 / 0 / 1]
0: JFIF/JPEG
1: TIFF/MMR
2: TIFF/MH
3: TIFF/MR
Enabled only when optional MLB (Media Link
Board) is installed.
5836
91* Default for JPEG Sets the JPEG format default for documents sent to
the document management server via the MLB with
JPEG selected as the format.
[5~95 / 50 / 1]
Enabled only when optional MLB (Media Link
Board) is installed.
IEEE 1394
4 Host Name Enter the name of the device used on the network.
Example: RNP0000000000
7* Cycle Master Enables or disables the cycle master function for
the 1394 bus standard.
[0~1/1/1]
0: Disable (Off)
1: Enable (On)
8* BCR mode Determines how BCR (Broadcast Channel
Register) operates on the 1394 standard bus when
the independent node is in any mode other than
IRM. (NVRAM: 2-bits)
Standard
IBM Color Copy
Always Effective
5839
9* IRM 1394a Check Conducts a 1394a check of IRM when the
independent node is in any mode other than IRM.
[0~1/1/1]
0: Checks whether IRM conforms to 1394a
1: After IRM is checked, if IRM does not conform
then independent node switches to IRM.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA