Ricoh IM C300

Image Adjustment
D0CA/D0C9/D0C8/D0CB 4-260 SM
Y) C-5Y chart.
5 K Highlight
(Low ID)
(C,M, and Y)
<on the full
color copy>
Adjust the offset value so that the color balance
of black scale levels 3 through 5 in the copy is
seen as gray (no C, M, or Y should be visible). If
the black scale contains C, M, or Y, do steps 1 to
4 again.
- Photo Mode, Single Color -
Item to
Adjust
Level on the C-5Y chart Adjustment Standard
1 ID max: (K)
Adjust the offset value so that the density of level
13 matches that of level 13 on the C-5Y chart.
2 Middle
(Middle ID)
(K)
Adjust the offset value so that the density of level 7
matches that of level 7 on the C-5Y chart.
3 Shadow
(High ID)
(K)
Adjust the offset value so that the density of level
11 matches that of level 11 on the C-5Y chart.
4 Highlight
(Low ID) (K)
Adjust the offset value so that dirty background
does not show on the copy and the density of level
3 is slightly lighter than that of level 3 on the C-5Y
chart.
- Text (Letter) Mode, Full Color -
Item to
Adjust
Level on the C-5Y chart
(K)
Adjustment Standard
1 ID max: (K,
C, M, and Y)
Adjust the offset value so that the density of level
13 matches that of level 13 on the C-5Y chart.
2 Middle
(Middle ID)
(K, C, M,
and Y)
Adjust the offset value so that the density of level
7 matches that of level 7 on the C-5Y chart.
3 Shadow
(High ID)
(K, C, M,
and Y)
Adjust the offset value so that the density of level
11 matches that of level 11 on the C-5Y chart.
4 Highlight
(Low ID)
(K, C, M,
and Y)
Adjust the offset value so that dirty background
does not show on the copy and the density of
level 3 is slightly lighter than that of level 3 on the
C-5Y chart.
- Text (Letter) Mode, Single Color -