Firmware Update (Error Screens During Updating)
D0CA/D0C9/D0C8/D0CB 5-38 SM
Code Contents Solutions
the machine at the reserved date/time of
the remote firmware update from the
network.
the next reception time has elapsed.
66 Reception failed due to the status error
of the machine at the reserved date/time
of the package firmware update from the
network.
• Reset the reservation date/time for the
remote update.
67 Acquisition of the latest version
information from the Gateway fails at the
reserved date/time of the remote
firmware update from the network.
• Check that the network is connected
correctly.
68 Acquisition of the latest version
information from the Gateway fails.
• Check that the network is connected
correctly.
69 Download fails at the reserved date/time
of the remote firmware update from the
network.
• Check that the network is connected
correctly.
70 Package firmware download from the
network fails.
• Check that the network is connected
correctly.
71 Network communication error occurs at
the reserved date/time of the package
firmware update from the network.
• Check that the network is connected
correctly.
72 The setting of @Remote is invalid at the
reserved date/time of the package
firmware update from the network.
• Set the setting of @Remote Service in the
Administrator Tools to [Do not Prohibit].
74 Package file decompression has failed.
• If this occurred during the update by the
removable media, check that the
removable media is not defective,
download the package again, and retry
the update.
• If this occurred during the remote
firmware update (WIM and utility) in the
local environment, replace the package
file in the local environment with the
correct one and retry the update.
• If this has occurred on other occasions or
keeps occurring even on the above
mentioned occasions, replace the DIMM
of the controller board (PCB24).
To Next Page
Loading...
