Internal Finisher
SM 7-37 D0CA/D0C9/D0C8/D0CB
The exit guide plate motor (M21) [A] drops the gathering roller onto the paper.
• The paper exit motor (M17) [B] turns the roller in reverse.
• When the staple tray paper sensor (S42) [D] detects the paper, the motors stop feeding.
([C] is the paper transport motor (M16))
This diagram shows how the machine reverse-feeds the sheet of paper into the stapler.
• The next sheet is fed into the finisher, then reversed into the stapler tray.
• Jogger motor (M20) [A] moves the jogger fence [B].
• Jogger fence HP sensor (S41) [C] detects whether or not the jogger fence [B] is at the
home position again after jogging.
To Next Page
Loading...
