Rohde & Schwarz RTP Series - Page 1289

Remote control commands
R&S
®
RTP
1289User Manual 1337.9952.02 ─ 12
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:EBIT........................................................ 1291
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:KDSYmbol............................................... 1291
TRIGger<m>:SERPattern:EBTB:SCRMble..................................................................... 1291
TRIGger<m>:SERPattern:EBTB:ALIGnment <EBTBAlignment>
Selects one of the comma control symbols used for synchronization.
Suffix:
<m>
.
1..3
Parameters:
<EBTBAlignment> K281 | K285 | K287
*RST: K285
Usage: Asynchronous command
TRIGger<m>:SERPattern:EBTB:APPend
Creates an empty row and adds it to the end of the active symbol description in the
8b/10b table.
Suffix:
<m>
.
1..3
Usage: Event
Asynchronous command
TRIGger<m>:SERPattern:EBTB:CLEar
Removes all entries from the 8b/10b table.
Suffix:
<m>
.
1..3
Usage: Event
Asynchronous command
TRIGger<m>:SERPattern:EBTB:COUNt?
Selects the number of 8b/10b symbols.
Suffix:
<m>
.
1..3
Return values:
<EBTBSymbolCount>Range: 0 to 16
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
Trigger