Rohde & Schwarz RTP Series - Page 1288

Remote control commands
R&S
®
RTP
1288User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..3
Parameters:
<PRBSBtErrRate> Range: 0 to 100
Increment: 100E-6
*RST: 1
Default unit: %
Usage: Asynchronous command
TRIGger<m>:SERPattern:PRBS:NBRTe <PRBSNomBitRate>
Sets the nominal bit rate for the PRBS sequence. It corresponds to the data rate of the
data stream from which the clock is to be recovered.
Suffix:
<m>
.
1..3
Parameters:
<PRBSNomBitRate> Range: 200E+3 to 2.5E+9
Increment: 10
*RST: 1E+9
Default unit: bps
Usage: Asynchronous command
TRIGger<m>:SERPattern:PRBS:PSEQuence <PRBSSequence>
Selects a predefined pseudorandom binary sequence.
Suffix:
<m>
.
1..3
Parameters:
<PRBSSequence> PRBS7 | PRBS9 | PRBS11 | PRBS15 | PRBS16 | PRBS17 |
PRBS20 | PRBS23 | PRBS29 | PRBS31
*RST: PRBS7
Usage: Asynchronous command
22.9.13.5 8b/10b
TRIGger<m>:SERPattern:EBTB:ALIGnment...................................................................1289
TRIGger<m>:SERPattern:EBTB:APPend....................................................................... 1289
TRIGger<m>:SERPattern:EBTB:CLEar..........................................................................1289
TRIGger<m>:SERPattern:EBTB:COUNt?.......................................................................1289
TRIGger<m>:SERPattern:EBTB:ERRor<n>:DISParity..................................................... 1290
TRIGger<m>:SERPattern:EBTB:ERRor<n>:SYMBol....................................................... 1290
TRIGger<m>:SERPattern:EBTB:FID..............................................................................1290
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:DMINus?..................................................1290
TRIGger<m>:SERPattern:EBTB:SYMBols<n>:DPLus?....................................................1291
Trigger