Rohde & Schwarz RTP Series - Page 1651

Remote control commands
R&S
®
RTP
1651User Manual 1337.9952.02 ─ 12
Query parameters:
<SearchName>
Return values:
<FrameState> OK | FORM | BTST | CRC | CRCD | NOACk | ACKD | EOFD |
CAERror | FCERor | INSufficient | SERRror | SFERror |
SCERror | SAERror | SCAE | SCFE
See BUS<m>:CAN:FRAMe<n>:STATus? on page 1629.
*RST: OK
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:STOP?
<SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameStop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:SYMBol? <SearchName>
Returns the symbolic label of the specified frame if the label list is enabled.
Suffix:
<m>
.
*
Selects the number of the frame in the current acquisition, 1...n.
Query parameters:
<SearchName> String parameter that contains the search definition name
Return values:
<Label> Symbolic label (string)
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:TYPE? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Protocols