Rohde & Schwarz RTP Series - Page 1914

Remote control commands
R&S
®
RTP
1914User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:MPHY:ERRor:REServed <SearchName>,<ErrorReserved>
SEARch:TRIGger:MPHY:ERRor:REServed? <SearchName>
Enables/disables search for reserved bit error.
Parameters:
<ErrorReserved> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:ERRor:LCMD
<SearchName>,<LCCError>
SEARch:TRIGger:MPHY:ERRor:LCMD? <SearchName>
Enables/disables search for LCC error.
Parameters:
<LCCError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:ERRor:SYMBol <SearchName>,<ErrorSymbol>
SEARch:TRIGger:MPHY:ERRor:SYMBol? <SearchName>
Enables/disables search for 8b10b symbol error.
Parameters:
<ErrorSymbol> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:ERRor:UNKNown <SearchName>,<ErrorUnknown>
SEARch:TRIGger:MPHY:ERRor:UNKNown? <SearchName>
Enables/disables search for unidentified UniPro frame error.
Parameters:
<ErrorUnknown> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Protocols