Rohde & Schwarz RTP Series - Page 2001

Remote control commands
R&S
®
RTP
2001User Manual 1337.9952.02 ─ 12
22.17.18.5 Search results
In all SEARch:RESult:MDIO:WORD<m> commands, the suffix <m> selects the packet
number in the list of search results.
SEARch:RESult:MDIO:WORD<m>:DATA?..................................................................... 2001
SEARch:RESult:MDIO:WORD<m>:PHYS?.....................................................................2001
SEARch:RESult:MDIO:WORD<m>:REGI?..................................................................... 2002
SEARch:RESult:MDIO:WORD<m>:ST?......................................................................... 2002
SEARch:RESult:MDIO:WORD<m>:STARt?.................................................................... 2002
SEARch:RESult:MDIO:WORD<m>:STATe?.................................................................... 2003
SEARch:RESult:MDIO:WORD<m>:STOP?.....................................................................2003
SEARch:RESult:MDIO:WORD<m>:SYMBol?..................................................................2004
SEARch:RESult:MDIO:WORD<m>:TYPE?.....................................................................2004
SEARch:RESult:MDIO:WCOunt?...................................................................................2004
SEARch:RESult:MDIO:WORD<m>:DATA? <SearchName>
Returns the 16-bit payload data field content (in Clause 22 or Clause 45), or the 16-bit
address field content (in Clause 45, only) from the selected word within the search
result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Data>
Usage: Query only
SEARch:RESult:MDIO:WORD<m>:PHYS? <SearchName>
Returns the 5-bit address field content (PHYAD/PRTAD) from the selected word within
the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<PhyAd> Range: 0 to 32
Increment: 1
*RST: 0
Usage: Query only
Protocols