Rohde & Schwarz RTP Series - Page 2033

Remote control commands
R&S
®
RTP
2033User Manual 1337.9952.02 ─ 12
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:SDATa <SearchName>,<DataPacket>
SEARch:TRIGger:USB:SDATa? <SearchName>
Enables the search for any data packet.
Parameters:
<DataPacket> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:SERRor <SearchName>,<ErrorCondition>
SEARch:TRIGger:USB:SERRor? <SearchName>
Enables the search for various errors.
Parameters:
<ErrorCondition> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:SHANdshake <SearchName>,<HandshakePacket>
SEARch:TRIGger:USB:SHANdshake? <SearchName>
Defines, whether the search for any handshake packet shall be activated or not.
Parameters:
<HandshakePacket> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:SSOP <SearchName>,<StartofPacket>
SEARch:TRIGger:USB:SSOP? <SearchName>
Defines, whether a start of packet (SOP) search shall be activated or not.
Parameters:
<StartofPacket> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
Protocols