Rohde & Schwarz RTP Series - Page 2091

Remote control commands
R&S
®
RTP
2091User Manual 1337.9952.02 ─ 12
Return values:
<FrameByteValue>
Usage: Query only
BUS<m>:USBPd:RESult:FRAMe<n>:FLD<o>:STATus?
Returns the status of the field with the selected field number within the frame with the
selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
Selects the frame number.
<o> *
Selects the field number.
Return values:
<FieldState> OK | UNKNown | INComplete | PREamble | SOP | CRC |
LENGth | FBFB
SOP
Start of packet warning
CRC
Cyclic redundancy check error
FBFB
4b5b error
*RST: OK
Usage: Query only
BUS<m>:USBPd:RESult:FRAMe<n>:FLD<o>:STARt?
Returns the start time of the field with the selected field number within the frame with
the selected frame number (for the selected serial bus).
Suffix:
<m>
.
1..4
<n> *
<o> *
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
Protocols