Rohde & Schwarz RTP Series - Page 2121

Remote control commands
R&S
®
RTP
2121User Manual 1337.9952.02 ─ 12
Query parameters:
<SearchName>
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:SWIRe:FRAMe<m>:DATA? <SearchName>
Returns the data value for the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Data>
Usage: Query only
SEARch:RESult:SWIRe:FRAMe<m>:STARt? <SearchName>
Returns the start time of the specified frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:SWIRe:FRAMe<m>:STATe? <SearchName>
Returns the overall state of the selected frame within the search result.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<State> OK | PAR | ESC | AMB | INComplete
Protocols